Premium Fuel… What you need to know!


I get people coming into the shop and talking with me all the time about their cars.  One of the things that honestly doesn’t come up very often is fuel.  I’d venture to say that most people think that premium fuel is simply better.  In a way I suppose it is but maybe not in the way you would think.  I’m here today to debunk the premium fuel myth and maybe confirm some suspicions that you might have about it.

So lets first get into the difference between regular (87 octane), premium (90-93 octane) and we will even cover a bit about E85 (yuk…). The main differences between premium and regular fuels are their resistance to self ignite and the additive package that the fuel manufacturer adds.  Regular fuel usually has very few if any additives that help to keep your fuel system and engine clean while most premium fuels will have detergent additives that honestly in my opinion are just marketing ploys to get you to spend the extra money on it.  Gasoline in itself is a great cleaner!

So what does this all mean and how does it apply to you and your vehicle?

I thought you’d never ask!!  You see, engines run by burning a compressed air and fuel mixture.  Air is drawn into the engine by pistons moving downward within a cylinder, similar to how one of those tube style water guns draw in water as you dip the tip in the water source and pull back the handle. While this air is being drawn in, a small mist of fuel is sprayed into air stream through the fuel injector and drawn into the cylinder with the air.  Once the piston is at the bottom of it’s stroke and it’s drawn in all the air and fuel that it can, the valve that let the air and fuel in closes and the piston heads back up in the cylinder squeezing (compressing) the air and fuel because the valve is now closed and nothing can escape.  This squeezing and compressing (known in the field as “compression”) creates a lot of heat and if enough heat is created, the air and fuel could ignite without the aid of the spark plug and before the piston gets near the top of its travel.  That’s where the fuel quality comes into play.

The fuel absolutely cannot ignite before the spark plug ignites it.  If it does this will cause a condition known as spark knock, or engine ping and that condition can be very damaging to an engine if left to continue.  Higher performance engines create more compression.  In other words to get more power they squeeze the air and fuel more.  Some production engines can have a compression ratio as high as 10:1!  That means if you start with 10 units worth of volume it will get squeezed down to just 1. It’s that extreme amount of compression and therefore heat creation that requires the use of premium or higher octane fuel so that spark knock doesn’t happen and tear up the engine.  Premium fuel resists that urge to ignite under high compression and heat better than regular.   For most gas engines on the road today, regular fuel is just fine and honestly using premium fuel will give you almost no benefit.  However, if you have a performance vehicle, and on your fuel door you see a sticker warning you to use premium fuel, you should.  That’s really it!  There isn’t any other reason to run it!

So the bottom line is this:  If the engine in your vehicle requires high octane fuel, use it.  It’ll run on regular, but you might unknowingly be doing damage to your engine.  If your vehicle doesn’t require it, don’t use it.  It’s not worth the extra cost as it will not provide any noticeable performance gains or power.  It MIGHT help keep things a little cleaner in there, but it is certainly no substitute for professional fuel and induction cleaning services that should be performed regardless of fuel type used at least every 20,000-30,000 miles and even sooner on a GDI equipped engine as there are places inside your engine that will suffer from carbon build up that do not come in contact with fuel to keep them clean, but that’s a topic for another day!  One more thing I should mention, if I don’t someone else will, some premium grade fuels do not have the “up to 10% ethanol” in them that pretty much all regular grade fuels do.  Honestly, I haven’t seen that much problem caused by the 10% ethanol in regular so I wouldn’t be worried about it.

Oh yea, I almost forgot… E85….  My professional opinion?  Stay away from it!  Especially if your vehicle is not a “Flex Fuel” vehicle. It’s tempting to use as it’s usually quite a bit cheaper, but I can’t tell you how many vehicles over the years have been towed to my shop after filling up with E85.  That’s right, some cars won’t even run on it!  And the ones that are designed to run on it see anywhere from a 3-7 MPG drop versus using regular.  E85 fuels can contain up to 80% ethanol which does not burn anywhere near the same rate as gasoline.  Flex fuel vehicles are equipped to handle this difference with extra sensors and programming to make the adjustments to the engine when this fuel is detected but fuel mileage will still suffer.

Till next time thanks for reading and as always you can find more info about my shop Auto Go Automotive Here!

Tires. The Round, The Black and the Misunderstood


Tires.  You might think you know all there is to know, or you might not know anything at all except that they are on your vehicle.  How do you know what tires to buy?  How do you know when to buy tires?  There are so many questions surrounding tires these days and I’ll try to clear up some of this confusion.

First of all, your tires are your vehicle’s link to the pavement, or the dirt, or mud or whatever it is that your vehicle is riding on.  Without them, you basically go nowhere, or at least not that far.  Your tires are tough, taking a literal beating with 1000s of pounds of weight on them every time you drive your car.  And honestly, they ask very little of you to do their job right.  Here is what you need to do to make sure your tires go the distance.

  1. Make sure the air pressure is set properly.  This is so easy to do.  A cheap tire pressure gauge can be purchased at just about any store these days.  Check the placard in the driver front door jamb for information on what the tire pressure should be.  Set the tire pressure to the recommended pressure and that’s it.  Of course if you don’t have an air compressor, it can take a long time using a bicycle pump so come see us at Auto Go Automotive and we will check and properly inflate all your tires to the correct pressure at NO CHARGE!  Please do not rely on on your tire pressure monitoring systems to set your tire pressures or depend on them to warn you when you need to add air.  These systems are great for warning you if a tire looses pressure quickly but you should still check your tire pressures at least once a week as only 3-5 psi difference can begin to affect tire wear and fuel mileage!
  2. Rotate and balance your tires every 5000-6000 miles.  Rotating helps your tires wear more evenly.  It is a fact of life that the front tires usually wear faster than the rear tires, as the front tires do all the steering, constantly changing direction and that increased friction with the road surface accelerates the wear on the front tires.  Rotating your tires will help to even out and distribute that wear among all 4 tires allowing you to greatly extend the time frame between which you have to purchase tires.  This also allows a trained technician to inspect the tires for any possible problems and check and adjust the air pressure.
  3. Have the alignment checked annually at minimum.  Misaligned tires will cause irregular and accelerated tire wear, such as when the outer or inner edge of the tread is all worn off and the center of the tread has good tread remaining.  Alignment problems can also cause the vehicle to pull or drift one way or the other and can cause the steering wheel to be off center when the vehicle is driving straight.  Regularly having the alignment checked and adjusted will ensure that your tires will have a long life and deliver a smooth comfortable ride.
  4. Check for and replace worn steering and suspension parts.  Worn steering and suspension parts will allow for these systems to move on their own too much changing critical alignment angles resulting in accelerated tire wear, reduced control of the vehicle, or in extreme cases loss of control of the vehicle should one of these components completely break.  It’s very important that every time the vehicle is in for service that a complete steering and suspension inspection be done.  More often than not a worn component can be identified and replaced well before it poses a safety or tire wear risk.

These are the most important things you can do to help your tires deliver many 10s of 1000s of miles of great and comfortable service.  As always, if you are in need of tires or need anything else we are standing by waiting to serve you.  You can reach us at 417-272-0091 or CLICK HERE!

How do I get my car ready for winter?

Winter time is here!  If you haven’t already you should have had your car checked out for winter.  I field a lot of phone calls from my customers asking about what they need to do to get their car ready for the winter season or if there is an actual winterizing procedure.  In this post I’ll talk about the key things you need to make sure you have done to ensure your car or truck will be good to go this winter.
  1. Check your engine coolant level and freeze point.  This is perhaps one of the most costly yet easiest to detect issues you could encounter if this is a problem.  The coolant in your engine is a liquid, it’s purpose to keep your engine cool when its running by transferring the heat away from the engine to the radiator where the heat is then given off to the air.  If the coolant does not have the proper mix of antifreeze and water, the temperature at which the coolant could freeze can be much higher.  Typically, your coolant should test at a -35°F or less (as in -40 or -50) for proper freeze up protection.  If the coolant freezes, it will try to expand in the engine breaking the engine and causing catastrophic damage that usually ends up in replacing the entire engine.  Of course we have the knowledge and tools needed to check your coolant and help you avoid very costly repairs down the road.

  2. Check your tires.  Ice and snow demand tires that have good tread to minimize slippage and maximize grip.  We have been luck the last few years with minimal snow fall, but it will come.  It’s just a matter of time and bald tires are not going to be a good thing when it does.

  3. Check your vehicle’s heater.  Nothing is worse than the heater not working on a cold morning.  Lots of things can cause the heater to blow cold air or no air at all and we are experts at finding those types of problems.

  4. Have an emergency kit in your car.  Things like extra water, flashlights, blankets, a first aid kit among other things.  Make sure you know how to put on your spare tire should the need arise.

There really isn’t any specific winterizing procedure for your car and this is a short lost of the items that should be checked.  As long as all systems are functioning properly, you should be good to go.  It’s very important to make sure that all those systems are in fact functioning properly because if they aren’t the winter cold will surely let you know!  Contact us or schedule your check up appointment today and weather the winter season with peace of mind!.